Servo HS 311 standard 3,7 kg 0,15secondi

Codice articolo: HS311
Produttore: Hitec

Recensisci per primo questo prodotto

In magazzino
€ 10,50
OR

Panoramica veloce

Servo HS 311 standard 3,7 kg 0,15secondi

Servo HS 311 standard 3,7 kg 0,15secondi

Doppio click sull'immagine per ingrandirla

Diminuisci
Ingrandisci

Altre viste

Descrizione prodotto

Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.19sec/60° at no load Operating Speed (6.0V): 0.15sec/60° at no load Stall Torque (4.8V): 42 oz/in (3.0 kg/cm) Stall Torque (6.0V): 49 oz/in (4.5 kg/cm) Current Drain (4.8V): 7.4mA/idle, 160mA no load operating Current Drain (6.0V): 7.7mA/idle, 180mA no load operating Dead Band Width: 5usec Operating Angle: 45° one side pulse traveling 450usec Direction: Multi-directional Motor Type: Cored Metal Brush Potentiometer Drive: 4 Slider/Direct Drive Bearing Type: Top Resin Bushing Gear Type: Nylon 360 Modifiable: Yes Connector Wire Length: 11.81" (300mm) Weight: 1.52oz (43g)